 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MINIATURE RELAY 1 POLE--1 to 2 A (FOR SIGNAL SWITCHING) FBR211 SERIES s FEATURES q q q q q q q 2 A maximum carrying current Capable of 2 A maximum continuous carrying current in the contact Superior reliability gold-overlay contacts P type: Gold-overlay silver-palladium contacts International terminal pitch of one inch grid terminal layout High sensitivity, low power dissipation types also available Standard types: 0.45 W (A or B type) High sensitivity types: 0.2 W (C or E type) Conforms to FCC 68.302 (high dielectric strength type) UL recognized (File number E63615) CSA recognized (File number LR64026) s ORDERING INFORMATION [Example] (a) (b) FBR211 S A (a) (b) (c) D012 (d) U-P (e) (f ) FBR211 2 (g) (-CSA) (h) Series Name Enclosure S: Flux free type N: Plastic sealed type A: Standard A type (nominal power 0.45 W type) B: Standard B type C: High sensitivity C type (nominal power 0.2 W type) E: High sensitivity E type (c) Coil Power and Schematics } } (d) (e) (f ) Nominal Voltage UL Standard Contact Material (Example) D003: 3 VDC D012: 12 VDC (refer to the COIL DATA CHART) Nil : Standard U : UL114 recognized P : Gold-overlay silver-palladium M : Gold-overlay silver Nil : Standard 2 : High dielectric strength type Nil : Standard -CSA : UL114 + CSA recognized (e) is U (g) (h) Special Type CSA Standard Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR211SAD005-P Stamp: 211SAD005-P 1 FBR211 SERIES s SAFETY STANDARD AND FILE NUMBERS UL114 (File No. E63615) C22.2 No. 14 (File No. LR40304 or LR64026) Nominal voltage 1.5 to 24 VDC Contact rating 1 A 28 VDC resistive 0.5 A 30 VAC resistive s SPECIFICATIONS Item Contact Arrangement Material Resistance (initial) Rating (resistive) Maximum Carrying Current Maximum Switching Power Max. Switching Voltage*1 Maximum Switching Current Minimum Switching load*2 (reference) Coil Nominal Power (at 20C) Operate Power (at 20C) Operating Temperature Operating Humidity Time Value Operate (at nominal voltage) Release (at nominal voltage) Insulation Resistance (initial) Dielectric Strength between coil and contacts between open contacts Life Mechanical Electrical (Refer to the REFERENCE DATA) Other Vibration Resistance Shock Resistance Weight Misoperation Endurance Standard (A or B type) 1 form C (SPDT) Gold-overlay silver-palladium or gold-overlay silver Maximum 100 m (at 0.1 A 6 VDC) 0.5 A 120 VAC or 1 A 28 VDC 2A 60 VA or 28 W 220 VAC or 150 VDC 1.25 A (AC) or 2 A (DC) Plastic sealed 1 mA 1 Flux free 1 mA 5 Approximately 0.45 W Approximately 0.315 W maximum -25C to +55C (no frost) 45 to 85%RH Maximum 5 ms Maximum 5 ms Minimum 100 M (at 500 VDC) 500 VAC 1 minute (standard) 1,000 VAC 1 minute (high dielectric strength type) 500 VAC 1 minute 5 x 106 operations minimum 3 x 105 operations minimum (at 1 A/ 28 VDC resistive load) 1 x 105 operations minimum (at 2 A/ 12 VDC resistive load) 1 x 105 operations minimum (at 0.5 A/120 VDC resistive load) 10 to 55 Hz (double amplitude of 1.5 mm) 100 m/s2 (111 ms) 1,000 m/s2 (111 ms) Approximately 4 g 60 m/s 2 (111 ms) Approximately 0.2 W Approximately 0.14 W maximum -25C to +75C (no frost) High sensitive (C or E type) *1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operation environment. 2 FBR211 SERIES s COIL DATA CHART 1. STANDARD (A or B type) MODEL A type Flux free Plastic sealed Nominal current Must Coil Nominal B type resistance (at nominal operate voltage voltage) voltage (10%) Flux free Plastic sealed approx. 1.5 VDC 3 VDC 5 VDC 6 VDC 9 VDC 12 VDC 5 20 56 80 180 320 1,280 300 mA 150 mA 89 mA 75 mA 50 mA 38 mA 19 mA 70% max. 10% min. of nominal of nominal voltage voltage 150% of Approx. Approx. nominal 450 mW 45 deg voltage (at nominal (at nominal voltage) voltage) Must release voltage Maximum allowable voltage Coil Nominal temperature power rise FBR211SAD001-s FBR211NAD001-s FBR211SBD001-s FBR211NBD001-s s s s s FBR211SAD003-s FBR211NAD003-s FBR211SBD003-s FBR211NBD003-s s s s s FBR211SAD005-s FBR211NAD005-s FBR211SBD005-s FBR211NBD005-s s s s s FBR211SAD006-s FBR211NAD006-s FBR211SBD006-s FBR211NBD006-s s s s s FBR211SAD009-s FBR211NAD009-s FBR211SBD009-s FBR211NBD009-s s s s s FBR211SAD012-s FBR211NAD012-s FBR211SBD012-s FBR211NBD012-s s s s s FBR211SAD024-s FBR211NAD024-s FBR211SBD024-s FBR211NBD024-s 24 VDC s s s s Note: All values in the table are measured at 20C. 2. HIGH SENSITIVITY (C or E type) MODEL C type Flux free Plastic sealed Nominal current Must Coil Nominal E type resistance (at nominal operate voltage voltage) voltage (10%) Flux free Plastic sealed approx. 1.5 VDC 3 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 12 45 120 180 400 700 2,800 125 mA 67 mA 42 mA 33 mA 23 mA 17 mA 9 mA 70% max. 10% min. of nominal of nominal voltage voltage 225% of Approx. Approx. nominal 200 mW 25 deg voltage (at nominal (at nominal voltage) voltage) Must release voltage Maximum allowable voltage Coil Nominal temperature power rise FBR211SCD001-s FBR211NCD001-s FBR211SED001-s FBR211NED001-s s s s s FBR211SCD003-s FBR211NCD003-s FBR211SED003-s FBR211NED003-s s s s s FBR211SCD005-s FBR211NCD005-s FBR211SED005-s FBR211NED005-s s s s s FBR211SCD006-s FBR211NCD006-s FBR211SED006-s FBR211NED006-s s s s s FBR211SCD009-s FBR211NCD009-s FBR211SED009-s FBR211NED009-s s s s s FBR211SCD012-s FBR211NCD012-s FBR211SED012-s FBR211NED012-s s s s s FBR211SCD024-s FBR211NCD024-s FBR211SED024-s FBR211NED024-s s s s s Note: All values in the table are measured at 20C. s CHARACTERISTIC DATA Range of operation temperature and voltage (Standard 0.45 W type) 160 150 140 130 120 110 100 90 80 70 um xim Ma Nominal voltage multiplying factor (%) Range of operation temperature and voltage (high sensitive 0.2 W type) ge volta coil able llow ma imu Max Operate and release time data 5 Not including bounce time Nominal voltage multiplying factor (%) Time (msec) (Data) assumes that the maximum allowable temperature of E type insulation coil is 115C 160 150 140 130 120 110 100 90 80 70 (Data) assumes that the maximum allowable temperature of E type insulation coil is 115C 4 Op era te Operating voltage range Must opera -10 0 10 20 30 40 50 60 70 80 Operating temperature (C) Coil temperature rise data 70 Coil temperature rise (C) (at 20C) ( ( 1.0 AC contact rating) DC contact rating) DC resistive load 0.5 0.3 60 50 40 30 20 Service life (operations) Contact load current (A) e ag olt il v co le ab ow all 3 tim e Operating voltage range 2 Release time te vo ltage Must opera te vo ltage 1 -10 0 10 20 30 40 50 60 70 80 0 0.2 0.4 0.6 0.8 Operating temperature (C) Coil power (W) (x104) 200 100 50 12 V DC resistive load 10 5 120 V AC resistive load 28 V DC resistive load Maximum switching capacity AC resistive load Life curve Standard (0.45 W type) High sensitive (0.2 W type) 0.1 0.2 0.4 0.6 0.8 10 20 30 50 120 1 0 0.5 1.0 1.5 2.0 Coil power (W) Contact load current (A) Contact load current (A) 3 FBR211 SERIES s REFERENCE DATA Distribution of operate and release voltage 60 FBR211 n = 100 50 Distribution (%) Distribution (%) Distribution of operate and release time 100 FBR211 n = 100 Operate Release Distribution (%) Distribution of contact resistance 80 FBR211 n = 100 60 Operate Release 80 40 60 30 40 40 20 20 10 20 0 0 10 20 30 40 50 60 70 80 0 0 1 2 3 4 5 6 7 8 0 0 10 20 30 40 50 60 70 80 Nominal voltage multiplying factor (%) Time (ms) Contact resistance (m) s DIMENSIONS 1. STANDARD (Flux free type) qDimensions 10.1 +0.5 qSchematics (BOTTOM VIEW) 15.1 +0.5 (A type or C type) 1 3.2 (B type or E type) 1 12 56 87 10.5+0.5 5 8 6 7 12 0.6 0.35 (1.2) 0.3 7.62 (1.24) 10.16 2.54 2. N-TYPE (Plastic sealed type) qDimensions 11.7 +0.5 qSchematics (BOTTOM VIEW) 16.5 +0.5 (A type or C type) 1 3.2 (B type or E type) 1 12 56 87 10.7+0.5 5 8 6 7 12 0.6 0.3 7.62 (2.04) (1.9) 10.16 2.54 3. PC BOARD MOUNTING HOLE LAYOUT qPC board mounting hole layout (BOTTOM VIEW) 6-o1.0 10.16 2.54 7.62 Unit: mm 4 FBR211 SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fceu.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com (c) 2003 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 02/18/2003 5 |
Price & Availability of FBR211NAD003
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |